Level Control
Products
No results were found for the filter!
Signal cable, length = 3 m
Signal cable for electronic level control, length = 3 m
Safety Waste Cap, S60/61, Type 1
Safety Waste Cap, S60/61, GL25 (m), fitting for continuous level control (502042), PE-HD electrostatic conductive, connector for exhaust filter
Canister, 10 liter, S60/61
Canister, 10 liter, S60/61, PE-HD electrostatic conductive, with integrated welded sensor holder, Screwable sleeve (easier cleaning) for sensor 108178, Sensor housing made of PE-HD electrostatic conductive, Detection area of sensor...
Capacitive rod sensor, brass
Capacitive rod sensor for the level measuring with ATEX-license, II 2 G EEx ia IIC T1-T6, NAMUR. For proper functionality use in combination with isolating switching amplifier 108278 & Canister 108042-S1. Housing M18x1, active surface...
3-way ball valve, 3xGL25
3-way ball valve, 3x GL25 (m), electrically operated, material: stainless steel
SwitchBox SCAT
SwitchBox: control unit for SCAT Built-in Signalbox or Signalbox T1/T5. Controls electrically operated valve depending on the full-state signal. Aditionally, SwitchBox can be used in any kind of automation circuit (pump, valve, etc....
Signal Box2 (EU)
Built-in Signalbox2, 2-channel (EU), for Safety Waste Cap and other electronical level controlers, touchless alarm-resetting fields for two containers, two switch inputs and two switch outputs for peripheral units incl. 230V power supply...
Signal Box2 (US)
Built-in Signalbox2, 2-channel (US), for Safety Waste Cap and other electronical level controlers, touchless alarm-resetting fields for two containers, two switch inputs and two switch outputs for peripheral units incl. 110V power supply...
Signal Box2 (UK)
Built-in Signalbox2, 2-channel (UK), for Safety Waste Cap and other electronical level controlers, touchless alarm-resetting fields for two containers, two switch inputs and two switch outputs for peripheral units incl. 230V power supply...
Signalbox T1 - EU, Type 1
Signalbox T1 - EU, with 1 sensor input and 1 potential-free output (can be used to control external devices). Display: LED, power supply: 24V DC EU plug, switching power: 24V/2A, power consumption: max. 4W, dimensions (WxHxD): ca....
Continuous level control
Set for continuous level control with Signalbox UM-O-Ex with 230 VAC, with display unit and stainless steel sensor probe, incl. cable with open ends, pre-alarm at 75%, max. level at 95% of the container 107953, level sensor TORRIX Ex 6 B...
Signalbox T1 - USA, Type 1
Signalbox T1 - USA, with 1 sensor input and 1 potential-free output (can be used to control external devices). Display: LED, power supply: 24V DC USA plug, switching power: 24V/2A, power consumption: max. 4W, Dimensions (WxHxD): ca....
